Twitch 24/7 streams and the 48-hour limit: what Twitch allows, and how a round-the-clock channel keeps going
Twitch ends every broadcast at 48 hours, and nothing in its rules forbids a recorded or looped stream. What that means for a 24/7 channel: the restart, the Rerun label, Drops and simulcasting, each from Twitch's own pages.
Twitch ends every broadcast at 48 hours. Its Broadcasting Guidelines say it in two sentences - "The maximum broadcast length is 48 hours. This cannot be changed" - so a 24/7 Twitch channel is not one stream but a chain of broadcasts, each started again when the last one is cut.
Streaming around the clock is otherwise allowed. Twitch's Community Guidelines contain no rule against a pre-recorded or looped stream (we searched the full text on 12 November 2026). Twitch does ask that recorded content be labelled as a Rerun, it does not let rebroadcasts earn Drops, and when the same stream also goes to other platforms, its Simulcasting Guidelines apply. Every rule below links to the Twitch page it comes from, read on 12 November 2026.
How to run a 24/7 stream on Twitch
Five steps, in the order a round-the-clock channel needs them.
- Step 1
Connect the encoder to Twitch once
A 24/7 channel needs the same two values as any other stream: an ingest address and a stream key.
- The key is under Settings → Stream in the Creator Dashboard, and it does not change unless you reset it - or change your Twitch password, which resets it too (stream key FAQ).
- That matters more for a 24/7 channel than for anyone else: every restart after the 48-hour cut reuses the key, so a key that changed is a channel that does not come back.
- The Twitch RTMP walkthrough shows where each value lives and which ingest address to use.
If the channel stopped coming back after a password change, the encoder still holds the old key.
- Step 2
Set the encoder to Twitch's own numbers
Twitch publishes a table per resolution, and a long stream is where the wrong value shows.
- Constant bitrate (CBR), a keyframe every 2 seconds, and at most 6,000 kbps at 1080p60 (Broadcasting Guidelines).
- Twitch explains why CBR: a variable bitrate drops during quiet scenes and spikes during busy ones, and those spikes are what cause buffering and dropped connections on the way to Twitch.
- The full table is in the settings section below.
A file encoded for YouTube is usually above Twitch's ceiling: YouTube's own ladder goes to 9,000 kbps at 1080p60 and higher.
- Step 3
Label it as a Rerun
Twitch's help center asks for three labels when you broadcast recorded content.
- Tick Rerun in the Edit Stream Info panel, put [Rerun] at the start of the stream title, and at the start of the Go Live notification (On-Demand Content on Twitch).
- The checkbox adds a Rerun tag to the stream, and the channel page shows a Rerun label.
- Twitch's reason: without the label, viewers expect to engage with a live streamer, and failing to label it 'can damage community trust'.
For an ambient or music loop, '24/7' in the title says the same thing in words a viewer recognises - but the Rerun checkbox is the one Twitch asks for.
- Step 4
Plan for the 48-hour cut
The cap applies to every broadcast, live or recorded, and the encoder cannot raise it.
- Twitch's guidelines add one more sentence after the cap: "Reconnection behavior may depend on encoder used" (Broadcasting Guidelines).
- In practice that means the channel comes back only if whatever sends the stream notices the cut and connects again by itself.
- OBS left running on a home computer does not do that on its own; a script around FFmpeg or a cloud encoder can.
Check the channel at the 48-hour mark the first time. If it went offline and stayed offline, the encoder is not restarting.
- Step 5
Keep the loop off the Drops campaigns
This is the one place Twitch's Community Guidelines speak about rebroadcasts directly.
- Drops are meant to be earned during live gameplay, the Community Guidelines say - "not through streaming unrelated content like static images, rebroadcasts of past VODs/footage".
- Twitch's prohibited example is "Using VODs or static images to stream with the core purpose of 'Drop Farming'".
- So a 24/7 rebroadcast should not be set to a game category that is running a Drops campaign.
A short 'be right back' image during a live stream is Twitch's own allowed example. A channel built on rebroadcasts to collect Drops is the prohibited one.
What the 48-hour limit is, and what it is not
Four facts about the cap, and two about what Twitch keeps afterwards.
- It is a broadcast length, not a daily allowance. "The maximum broadcast length is 48 hours. This cannot be changed" (Broadcasting Guidelines). Nothing on the page limits how soon the next broadcast may start.
- It applies to everyone. The guidelines do not exempt Partners or Affiliates, and they do not distinguish a camera from a recording.
- Twitch does not say why. No Twitch page we read gives a reason for the number. Any explanation you read elsewhere is a guess.
- Coming back is the encoder's job. "Reconnection behavior may depend on encoder used" is all Twitch says about what happens next. Twitch's Disconnect Protection, a setting in the Creator Dashboard, shows viewers a temporary visual for up to 90 seconds while an encoder reconnects after a drop; Twitch does not say whether it covers the 48-hour cut.
- Past broadcasts are kept for 7, 14 or 60 days. 60 days for Partners and for Prime and Turbo users, 14 for Affiliates, 7 for everyone else - and only if storing past broadcasts is turned on in Stream Settings (On-Demand Content on Twitch).
- Highlights and uploads share 100 hours. That is the storage limit across all of them, unpublished ones included (On-Demand Content on Twitch). A 24/7 channel produces far more airtime than that, so decide early what is worth keeping.
So the 48 hours are not something to work around - they are the rhythm a 24/7 Twitch channel runs to: one broadcast, a cut, the next broadcast.
Encoder settings for a 24/7 Twitch stream
These are Twitch's own figures from its Broadcasting Guidelines, read on 12 November 2026. They are the same for a camera and a file.
| Setting | Twitch's figure | What it means for a 24/7 stream |
|---|---|---|
| Bitrate, 1080p60 | 6,000 kbps | The highest rung Twitch publishes |
| Bitrate, 1080p30 and 720p60 | 4,500 kbps | Enough for most loops and music visuals |
| Bitrate, 720p30 | 3,000 kbps | The lowest rung, and the most forgiving connection |
| Rate control | CBR | A steady rate; VBR spikes are what buffer |
| Keyframe interval | 2 seconds | Viewers join at a keyframe |
| x264 preset and profile | veryfast to medium, Main or High | NVENC: 2 B-frames |
| Audio | AAC-LC; 96 kbps recommended, 160 kbps maximum | Stereo or mono |
| Broadcast length | 48 hours | "This cannot be changed" |
- The bitrates are ceilings, not targets. Twitch says its recommended settings were tested to optimise quality without wasting bandwidth, and that a higher bitrate improves the picture "only up to a certain point".
- CBR matters more on a long stream. Twitch's own explanation of "broadcast starvation" - video that arrives late or not at all - names a bitrate too high for the connection and VBR spikes as causes, and both get more chances to happen over 48 hours than over two.
- A pre-encoded file keeps the bitrate it was made with. If the loop was encoded for YouTube, check it against the 6,000 kbps line before pointing it at Twitch.
The platform limits table puts the same figures beside YouTube's, Kick's and Facebook's, which is where a stream going to several of them is decided.
What Twitch's rules say about 24/7 and recorded streams
Read on Twitch's own sites on 12 November 2026. Where Twitch says nothing, that is stated too.
- No rule against a recorded or looped stream. The Community Guidelines contain no rule against pre-recorded or looped streams; we searched the full text, collapsed sections included, for 'pre-recorded', 'loop' and 'rerun' and found none. A round-the-clock stream is a format Twitch's rules do not address.
- Label recorded content as a Rerun. That request lives in Twitch's help center, not in the Community Guidelines: On-Demand Content on Twitch describes Reruns as "non-live content that you can play on your channel" and asks for the checkbox, a [Rerun] title prefix and the same prefix in the Go Live notification.
- Drops are for live gameplay. Under Spam, Scams and Other Malicious Conduct, the Community Guidelines say Drops may not be earned through "rebroadcasts of past VODs/footage", and name Drop farming with VODs or static images as a prohibited example.
- No channel for someone else's suspension. Under Suspension Evasion, the Community Guidelines forbid "a channel that functions to rebroadcast a suspended user's content". A 24/7 channel of your own videos is not that; a channel of a banned streamer's footage is.
- Simulcasting is allowed, on two conditions. Twitch's Simulcasting Guidelines apply to all streamers without an exclusivity agreement: the stream on Twitch must not be the degraded one - Twitch's example is shrinking the video or lowering its quality on Twitch - and Twitch "may not be used to drive users to a live stream on another platform". Links to your other channels in your bio or panels are permitted.
- A broadcast ends at 48 hours. Covered above: the same for every channel, and it cannot be changed.
Put together: a 24/7 loop of your own videos, labelled as a Rerun, outside Drops campaigns, and no worse on Twitch than anywhere else, is inside every rule Twitch publishes. The pre-recorded guide compares the same rules across YouTube, Kick, Facebook, TikTok and Rumble.
What goes wrong with a 24/7 Twitch channel
Four failures that come from Twitch's rules and limits rather than from a bad stream key.
The stream went offline after 48 hours and stayed offlineThat is the broadcast cap, and the encoder did not reconnect after it.
- The cap cannot be changed, so the fix is on the sending side: something has to start the next broadcast.
- Check that the stream key is still the one in the Creator Dashboard - a password change resets it.
- If the encoder runs on a computer at home, it also has to survive two days of updates, sleep and connection drops between cuts.
Viewers call it fake liveThey expected a streamer and found a recording.
- Tick Rerun in Edit Stream Info and start the title and Go Live notification with [Rerun] - the three steps Twitch's help center lists.
- Say in the title or panels what the channel is: '24/7', 'replay', 'lofi radio'.
- Don't title a replay as if it were happening now.
A Drops campaign became a problemThe loop ran in a category with active Drops.
- Move the 24/7 stream out of any category running a Drops campaign.
- Twitch names Drop farming with VODs or static images as prohibited; a rebroadcast cannot earn Drops at all.
- Keep Drops for the broadcasts where you play live.
The stream buffers for viewers, or Twitch looks worse than YouTubeThe file's bitrate is above what Twitch takes, or the rate is variable.
- Twitch's ceiling is 6,000 kbps at 1080p60 and 4,500 at 1080p30; a file encoded for YouTube is often above both.
- Use CBR: Twitch names VBR spikes as a cause of buffering and disconnections.
- When simulcasting, a stream that is worse on Twitch than elsewhere is also what Twitch's Simulcasting Guidelines ask you to avoid - Twitch sends a warning before taking any action.
Running a 24/7 Twitch channel with TheLoops
TheLoops runs the stream from a data center: you upload the videos once, and the encoder plays them as a loop or a playlist to your Twitch key. It has no timer of its own for Twitch's 48 hours - Twitch does the cutting. When Twitch closes the connection after a stream that was running, the encoder starts again straight away with the same key, and Twitch sees the next broadcast begin.
When the same broadcast also goes to YouTube or another platform, only the Twitch output drops at the cut; the others carry on. About a minute later the encoder restarts to reconnect Twitch, which briefly reconnects the other destinations with it - the multistreaming guide explains why one dead platform does not take the others down.
If a video's bitrate is above Twitch's 6,000 kbps, TheLoops still starts the stream and writes a warning into the broadcast's history, so a picture that looks worse on Twitch has an explanation where you would look for one. Destinations per broadcast run 1 on the free plan, then 3, 6 and 10 as the plans go up; pricing has the detail.
Keep a Twitch channel on air through every 48-hour cut
Upload your videos once and stream them to Twitch from a data center - restarted with the same key after each 48-hour cut, and to YouTube or Kick at the same time if you want.
- Loops and playlists from a data center, no computer at home
- Back on air after Twitch's 48-hour cut and after drops
- Up to 10 destinations from one broadcast
Twitch 24/7 questions
Yes, as a chain of broadcasts. Twitch's Community Guidelines have no rule against round-the-clock, pre-recorded or looped streams, but every broadcast ends at 48 hours, so the encoder has to start the next one each time.
It is the maximum length of one broadcast. Twitch's Broadcasting Guidelines say: "The maximum broadcast length is 48 hours. This cannot be changed. Reconnection behavior may depend on encoder used." The guidelines name no exceptions.
Twitch does not say. Its Broadcasting Guidelines state the limit and that it cannot be changed, and give no reason. Explanations elsewhere are guesses.
The broadcast ends. Whether the channel comes back depends on the encoder: Twitch says reconnection behaviour may depend on the encoder used. An encoder that reconnects by itself starts a new broadcast with the same stream key.
Twitch's help center asks for it when you broadcast recorded content: tick Rerun in Edit Stream Info, and start the stream title and the Go Live notification with [Rerun]. Twitch says that without the label viewers expect a live streamer, and that failing to label it can damage community trust.
No. The Community Guidelines say Drops are meant to be earned during live gameplay, not through rebroadcasts of past VODs or footage or static images, and name Drop farming with VODs as a prohibited example.
Yes, under Twitch's Simulcasting Guidelines: the stream on Twitch must not be degraded compared with the other platforms, and Twitch must not be used to drive viewers to a live stream elsewhere. Keep the bitrate within Twitch's 6,000 kbps at 1080p60 so the Twitch picture is not the worse one.
Read next
Which ingest address to use, where the key lives, and the errors that only look like a bad address.
What YouTube, Twitch, Kick, Facebook, TikTok and Rumble allow, in their own words.
One broadcast on several platforms - and whose rules bind.
Three free ways to loop a video live, and where each one breaks.
Bitrates, resolutions and protocols for each platform, side by side.
How to set up a 24/7 live stream without a PC, step by step.